¡Hola invitado! Accede o regístrate

Noticias MERCEDES BENZ

Mercedes Benz - Noticias

Notapor A.P.M. » 17 Sep 2013, 10:25

No habrá utilitario por ahora

Dieter Zetsche ha comentado en el salón de Frankfurt que, de momento, no tienen pensado entrar en el segmento B con Mercedes. Añade que harian mucho mas volumen, pero seria mas dificil sacar beneficio con él
“For now, I don’t see a need for us to go that way, but further down the line, it’s a possibility,”

http://www.carscoops.com/2013/09/merced ... -cars.html

Digo yo que ahora que está con Renault-Nissan, podria usar una de esas plataformas y motores, con lo que sacaria mas rendimiento. Y si lo sacan estas, siendo Mercedes mas cara, podrian sacar bastante mas, eso si, como bien comenta, vendiendo muchos claro
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: Mercedes Benz - Noticias

Notapor pol_maikol » 17 Sep 2013, 12:43

Sí pero ya se sabe que donde dije digo, digo Diego.
Avatar de Usuario
pol_maikol
 
Mensajes: 1122
Registrado: 10 Feb 2012, 14:22
Ubicación: Córdoba
Arriba

Re: Mercedes Benz - Noticias

Notapor A.P.M. » 17 Sep 2013, 13:02

pol_maikol escribió:Sí pero ya se sabe que donde dije digo, digo Diego.

Bueno, en este caso no es un no, es por ahora no. Vamos, que deja la puerta abierta, no como otras veces que las marcas dicen no y te plantan algo que va contra lo que dijeron :D
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: Noticias Mercedes Benz

Notapor A.P.M. » 18 Abr 2014, 21:04

Presenta el sistema hibrido inteligente
Usa el navegador para calcular la energia a recuperar en la carretera que se acerca, para asi poder maximizar el potencial electrico del hibrido a la hora de usarlo y asi reducir el gasto de combustible

Imagen

http://www.worldcarfans.com/11404187362 ... erformance


nota de prensa, en inglés
Intelligent HYBRID: Energy turnaround

Mercedes-Benz has developed an intelligent energy management system for hybrid vehicles that assesses the road ahead and takes it into account. The objectives of the "Intelligent HYBRID": benefiting from the freely available recuperation energy to the greatest extent possible and providing driving pleasure thanks the boost effect of the electric motor. To this end it constantly monitors the topography ahead of the vehicle. This not only works when route guidance by the navigation system is active, but also when this system is currently not in use. In developing new hybrid models Mercedes-Benz has benefited immensely from cooperating with its Formula 1 racing team, which also makes use of high-tech hybrid engines to achieve fuel savings. This can result in synergistic effects both for series production vehicles as well as racing cars.

Many hybrid vehicles waste energy when driving downhill. Because frequently their high-voltage battery has too high a charge at the wrong time to be able to additionally store the incidental free recuperation energy associated with driving downhill. The "Intelligent HYBRID" operating strategy, which Mercedes-Benz has employed in the S-Class since summer 2013 and now also uses in the new C-Class, ensures that the high-voltage battery is always only charged sufficiently enough to take advantage of all opportunities for recuperation provided by the route and the terrain.

In practice this means: if the battery is too full, the electric motor automatically boosts the combustion engine to discharge the battery enough to be able to fully store the expected recuperation energy. At the same time, thanks to the boost from the electric motor the vehicle uses less fuel and thus produces fewer emissions during this phase.

The system uses data from the COMAND Online navigation system to calculate the recuperation potential of the road ahead. For example, the data provides forward-looking information about the route profile and speed limits in a one-metre grid for up to seven kilometres in advance.

This information is processed by the Central Powertrain Controller (CPC), which then initiates the anticipatory measures. It not only lowers the battery charge in line with the situation before a downhill stretch by expanding the all-electric or boost periods, but also controls the potentially necessary recharging of the battery by the combustion engine with foresight in order to benefit from the most favourable battery state of charge. Further adaptive control algorithms additionally take the current vehicle weight, the driving behaviour (including vehicle speed and braking behaviour) and the load of the ancillary consumers into account for predicting the recuperation potential.

"Intelligent HYBRID" not only works as the only anticipatory operating strategy when a destination has been programmed into the navigation system, but also functions when route guidance is inactive. In this case the system calculates the probability of the driver making a turn dependent on the category of the road. For example, if the hybrid vehicle is travelling on a motorway, it assumes that the vehicle will probably continue on the motorway for the next seven kilometres.

"Intelligent HYBRID" keeps the driver informed about an upcoming elevated recuperation potential by highlighting the road ahead of the vehicle in green on the energy flow display.

How much fuel is being saved depends on the topography. This has been demonstrated by experience from many thousands of test kilometres. The more mountains there are, the higher the fuel savings will be. That is why the effect will be more noticeable in the mountains than on plains.

Currently Mercedes-Benz is becoming a talking point in the world of Formula 1 by deploying racing cars featuring hybrid technology. After Nico Rosberg triumphed at the opening race in Australia, there have been two one-two victories in Malaysia and Bahrain. In each case Lewis Hamilton finished ahead of Nico Rosberg. The next race takes place on 20 April in the Chinese metropolis of Shanghai.
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: Noticias Mercedes Benz

Notapor pol_maikol » 18 Abr 2014, 22:17

Esto sí que me parece una innovación de utilidad real y no simplemente de lanzar castillos al aire por puro marketing.
Avatar de Usuario
pol_maikol
 
Mensajes: 1122
Registrado: 10 Feb 2012, 14:22
Ubicación: Córdoba
Arriba

Re: Noticias Mercedes Benz

Notapor RadiK-Alfa » 19 Abr 2014, 14:48

Muy bonito ....

Luego sale el típico jubilado de Viena o de Frankfurt que sin sistemas de ningún tipo logra consumos de menos de 3 litros.

Quiero decir, que más formación en la conducción.

Que por mucho sistema inteligente si luego aprieto el pie derecho los consumos se van al garete.
RadiK-Alfa
 
Mensajes: 2330
Registrado: 13 Ago 2011, 09:31
Arriba

Re: Noticias Mercedes Benz

Notapor A.P.M. » 11 Sep 2014, 13:01

Mercedes reorganiza su producción
Imagen

Mercedes-Benz is set to restructure its production operations, modernizing global plants to build vehicles based on the latest modular platforms.

Expansion and reorganization will be guided by a new internal organization, known as Mercedes-Benz Operations (MO). The new entity diverges from the previous focus on management of individual models on a plant-by-plant basis, instead embracing centralized leadership to manage operations by modular platform.

"Under our previous production structure, the individual plants operated largely autonomously," said Mercedes-Benz production chief Markus Schafer. "Now, manufacturing will be organized according to product architectures, independent of individual locations."

Modular vehicle platforms include rear-wheel-drive (MRA), front-wheel-drive (MFA), SUV (MHA) and sports cars (MSA), along with the powertrain architecture known as MPA.

The plan is expected to cost more than three billion euros (~$3.9 billion USD) in 2014 alone, initially focusing on German production facilities. The company is attempting to ramp up production for 18 different models this year, spreading the assembly tasks across eight global facilities. Another dozen all-new models will also be added to the lineup by the end of the decade.

The new C-Class is the first vehicle to be produced via the new manufacturing principles, with production now spread across four continents. The company claims the buildout has been a success, though it is still working to further centralize supply-chain management.

"Given the expanding range of models, steadily increasing unit figures, and greater complexity than ever before, we have to become significantly more flexible," Schafer added. "It is essential that we achieve continuous improvement in all disciplines and raise our productivity."


http://www.leftlanenews.com/mercedes-be ... cture.html


En español
Mercedes reorganiza su fabricación para reducir costes

Mercedes-Benz está reorganizando sus operaciones de producción para reducir sus costes al mismo tiempo que las nuevas plataformas mejoran la flexibilidad, la productividad y reducen los costes fijos para limitar la inversión en cada modelo. Hasta ahora, el sistema tomaba por base una fábrica, el nuevo sistema, simplemente llamado Mercedes-Benz Operations o MO, se centra al rededor de las arquitecturas y de los modelos.

De manera concreta, por ejemplo, se eliminan así los directores de fábrica para conservar cuatro managers que gestionarán cada una de las arquitecturas de la marca. Éstos serán responsables de la producción de los modelos que tomen por base esa arquitectura, independientemente de la factoría o factorías que los fabriquen.

"Bajo nuestra anterior estructura de producción, cada factoría operaba de manera autónoma. Ahora, la producción se organizará según las arquitecturas de producto, independientemente de la fábrica", explicó Markus Schaefer, director de producción para Mercedes.

Mercedes ha nombrado a Andreas Kellerman al frente de la producción de la plataforma MRA de tracción trasera, que dará lugar a los Mercedes Clase C, Clase E y Clase S. Para la MFA de tracción delantera (Clase A, Clase B y derivados de ambos, como CLA y GLA) nos encontramos a Michael Goebel (que supervisaba la producción de los roadsters en Bremen).

Los SUVs y todoterrenos que usen la plataforma MHA correrán a cargo de Jason Hoff, CEO de la fábrica Mercedes de Alabama (EE.UU.). También se encargará de la arquitectura MSA, es decir los SL y SLK.

http://es.autoblog.com/2014/09/11/merce ... ir-costes/
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: Noticias Mercedes Benz

Notapor A.P.M. » 02 Oct 2014, 17:39

Es de agosto, pero es de actualidad. Lo he visto en la revista autopista de esta semana (dice que Renault tambien lo presentará en su 1.5 dci, aunque luego hablan de que lo presentaron en un motor de doble turbo, con lo que encaja con el 1.6 dci 160cv) y seguro que a algunos les gusta o les hace hacerse preguntas, dudas...
Deberia salir en breve, porque decian septiembre...

Pistones de acero para el 3.0 CDi 258cv
Hasta ahora, los pistones los llevaba de alumino. Se dice que con los nuevos de acero mejora la eficiencia puesto que conduce peor el calor y lo conserva. Segun parece, estos nuevos pistones ayudan a bajar un 3% el consumo consiguiendo un consumo de alrededor de 5L/100km y por debajo de los 140gr de CO2 en el E350 Bluetec (primero en recibirlo)

Nota de prensa, en inglés
The success story of diesel at Mercedes-Benz continues: High-tech steel pistons for added efficiency

Stuttgart – Innovative engineering from Mercedes-Benz once again provides trendsetting impetus in passenger car diesel technology. The world's pioneer in diesel technology from Stuttgart is the first to replace the hitherto conventional aluminium pistons in passenger car diesel engines with a new high-tech generation of pistons made of steel. The advantages they bring, when combined with the innovative NANOSLIDE® cylinder bore coating technology, include even lower fuel consumption and even lower CO2 emissions.

In 1936 Mercedes-Benz became the first company in the world to launch a diesel passenger car, thus taking on its role as a diesel pioneer. Stuttgart's automotive engineers consistently reinforced this leadership position over the decades that followed through the introduction of numerous technical innovations that have contributed significantly to making the passenger car diesel engine what it is today: powerful and yet economical – in short, efficient.

The engineers are now once again working to tighten the efficiency screw. In September 2014, new high-tech steel pistons will be celebrating their world premiere in a standard-production passenger car, in the V6 diesel engine of the Mercedes-Benz E 350 BlueTEC. Thanks, amongst other things, to this technical innovation the saloon continues to deliver the same engine output (190 kW/ 258 hp), yet only uses around 5.0 litres of diesel fuel per 100 kilometres – the saving achieved through the use of the steel piston is thus around three percent.

Steel pistons are already commonly found in commercial vehicle engines, where they are combined with heavy cast-iron crankcases, while aluminium pistons have over the years gradually become the norm for passenger car diesel engines. The high-tech steel pistons that Mercedes-Benz has now developed completely from scratch harmonise perfectly with the state-of-the-art and much lighter aluminium engine housings and the multiple-award-winning NANOSLIDE® cylinder bore coating technology also developed by Mercedes‑Benz.

Exploiting material advantages
Steel and aluminium have significantly different characteristics: steel expands less than aluminium when hot, conducts heat less well and is simply heavier. At first glance, this would seem to make the combination of aluminium housing and steel pistons tricky. Notwithstanding this situation, the Mercedes-Benz engineers discovered opportunities for the future by using the apparent differences between the properties of the respective materials to their best advantage.

They exploited the fact that a steel piston only expands with heat to about a quarter of the extent of its aluminium equivalent to fit the steel piston more tightly within the aluminium housing, with the effect that it sits very snugly in the cylinder bore. However, as the temperature rises during operation of the engine, the aluminium housing expands more than the steel piston – and the result is greater tolerance of the piston within the cylinder and thus less friction. As the piston/cylinder assembly alone causes between 40 and 50 percent of the mechanical friction, the potential for efficiency revealed here was significant.

Stronger, smaller, light
The steel pistons used up until this point were, however, little suited for the combination with engine housings made of aluminium. So instead, Mercedes‑Benz had to redesign the piston. The modern versions of the steel pistons that will now be fitted for the first time as standard in the V6 diesel on board the E 350 BlueTEC, within an aluminium crankcase with NANOSLIDE® cylinder bore coating technology, are high-tech components forged out of high-quality, high-strength steel. The challenge for the piston supplier is considerable, since the manufacturing process for the new, high-strength steels is similarly complex.

But the effort is worthwhile, as the higher strength of the modern steel allows for a more compact piston design, which more or less compensates for the fact that the material is around three times as dense. Indeed, the innovative steel pistons that will in future be working away within the six combustion chambers of the Swabian V6 diesel engine are as much as 13 millimetres lower than the aluminium equivalents used until now (aluminium pistons in the V6 diesel approx. 71.6 mm high, steel pistons only 58.6 millimetres). Thanks to this changed geometry and intelligent design, the weight of the unit comprising piston, gudgeon pin and piston rings is on a par with that of the version with aluminium piston. Mercedes-Benz has thus been able to compensate almost completely for the weight disadvantage of steel and even to ensure reserves of strength for peak pressures that may become even higher in future.

High efficiency, low consumption
At the same time the use of steel pistons has enabled the engineers to improve the level of efficiency, since the lower thermal conductivity of steel compared with aluminium means that higher temperatures are reached within the combustion chamber. The ignition quality thus increases, while the combustion duration is reduced. The result is lower fuel consumption and pollutant emissions. Mercedes-Benz took account of the lower thermal conductivity of steel with design modifications such as modified cooling ducts in the pistons.

Experience has shown that the innovative steel pistons optimise thermodynamic performance and, at the same time, reduce friction significantly. Furthermore, measurements showed that in the lower and middle speed ranges, so important in everyday driving, significant consumption benefits can be achieved.

Advantage steel
As far as the future is concerned, the engine designers at Mercedes-Benz see further possible advantages in the use of the high-tech steel pistons:

- Steel not only allows the piston to be made smaller, but also offers greater reserves for coping with mechanical stresses. This is particularly advantageous for further downsizing concepts
- Since steel pistons are stronger than aluminium ones, a diesel engine fitted with them can operate at higher temperatures and thus achieve a higher level of thermodynamic efficiency.
- Since the lower thermal expansion of steel pistons compared with aluminium also means that the engine designers are able to reduce the gap between the cylinder wall and the piston as far as the first piston ring, it has been possible to reduce both pollutants and untreated emissions.

Logical further development
These innovative steel pistons mark a logical next step in Mercedes-Benz's work to further develop diesel technology. As they have done so often in the past, proving themselves to be true diesel pioneers at every step of the way, the Stuttgart engineers continue to work on making the diesel engine a viable proposition for the future.

The V6 diesel engine, for example, which will now be going into series production with the new steel pistons for the E 350 BlueTEC, has been through various stages of development since its first appearance in the W212 in 2008. It also benefits from a further innovation developed by Mercedes-Benz: NANOSLIDE® cylinder bore coating technology. This technology was pioneered by Daimler in 2006 in the AMG V8 petrol engine. It uses twin-wire arc spraying (TWAS) technology to melt iron/carbon wires, which it then sprays onto the inside cylinder walls of the lightweight aluminium crankcase with the help of an inert gas flow. Very fine finishing of the resulting nano-crystalline iron coating creates an almost mirror-smooth surface with fine pores, which reduces friction between the piston assembly and the cylinder wall compared with when cast-iron cylinders are used, while also being extremely resistant to wear. Further benefits: lower engine weight, reduced consumption and CO2 emissions.

All in all, the V6 diesel from Mercedes-Benz today generates significantly lower CO2 emissions than it did in its previous appearances in the E-Class. In 2009 the combined figure for the emissions from the E 320 CDI was 179 grams of CO2 per kilometre; in the next-stage E-Class of 2013 this figure was 144 grams, combined. Thanks to the use of the steel piston, amongst other things, the figure for the E350 BlueTEC is now well below 140 grams. In a parallel development, the output has increased since 2008 from 155 kW (211 hp) to the current 190 kW (258 hp).

Mercedes-Benz a step ahead in diesel technology
It is envisaged that the new pistons will very shortly also be in use in Mercedes-Benz's four-cylinder diesel engines. Joachim Schommers, head of basic engine development at Mercedes-Benz: "We are assuming that pistons made of steel will in future also be in widespread use in passenger car diesel engines."
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: Noticias Mercedes Benz

Notapor A.P.M. » 31 Oct 2014, 16:14

Daimler anuncia que Mercedes-AMG compra el 25% de MV Augusta

Nota de prensa, en inglés
- Cooperation agreement signed on long-term partnership
- Mercedes-AMG to acquire 25% interest in MV Agusta
- Cooperation in area of marketing and sales


Affalterbach, Germany/Varese, Italy – The sports-car and performance brand Mercedes-AMG of the Daimler AG and the motorcycle manufacturer MV Agusta have signed a cooperation agreement on a long-term partnership. Cooperation between the two high-end brands with long traditions and histories will include the area of marketing and sales. At the same time, Mercedes-AMG GmbH will acquire a 25% interest in MV Agusta Motor S.p.A. No details have been disclosed of the price to be paid for the stake in MV Agusta Motor. Mercedes-AMG will appoint one member of MV Agusta’s board of directors. The partnership is still subject to the approval of the relevant authorities, which is expected to be granted in late November.

Tobias Moers, Chief Executive of Mercedes-AMG GmbH: “In MV Agusta, we have found the perfect two-wheel partner for Mercedes-AMG. This manufacturer with a long tradition and Mercedes-AMG are connected not only by a long and successful racing history, but also by shared values and goals for the future – allowing the experience of utmost perfection, optimal performance and motorsport technology for the road. The cooperation with MV Agusta also underscores the importance of AMG as the sports-car and high-performance brand of Mercedes-Benz Cars. The partnership provides us with an entry into a world of additional high-performance enthusiasts.”

Giovanni Castiglioni, President and CEO of MV Agusta Motor S.p.A., commented: “MV Agusta and Mercedes-AMG are a perfect brand fit: Two complementary companies that stand for design, high performance and excellence. Mercedes-AMG will help MV Agusta to further expand globally and to accelerate our growth. The uniqueness of MV Agusta will further enhance Mercedes-AMG’s leadership in the high-performance segment.”

Wilko Stark, Vice President Daimler Strategy & Mercedes-Benz Cars Product Strategy and Planning: “The positioning of Mercedes-AMG as the performance brand in the Mercedes-Benz product portfolio will be further strengthened through the strategic partnership with MV Agusta. The strategic cooperation with MV Agusta will allow us to address high-performance enthusiasts with automobiles and with motorcycles. Through the cooperation in the area of marketing and sales, we will be able to attract new target groups for both companies all over the world.”

As a 100% subsidiary of Daimler AG, Mercedes-AMG GmbH is the sports-car and performance brand of Mercedes-Benz Cars. The company was founded in 1967 by Hans Werner Aufrecht and Erhard Melcher, and built its reputation on the basis of great success in motorsport and a unique product portfolio. At present, the Affalterbach-based company employs approximately 1,200 people, of whom 700 are active in the area of development engineering. This reflects the company’s high technological standards and self-image: Mercedes-AMG automobiles are today renowned worldwide for high performance, perfection and precision, and are the benchmark in many areas. The company’s motorsport DNA is tangible in every model, and especially in the two sports cars completely developed in Affalterbach, the SLS and the recently unveiled Mercedes-AMG GT, which will further enhance the profile of the performance brand. In 2013, Mercedes-AMG achieved unit sales of 32,000 cars; by the middle of this year, a total of 23,000 AMG automobiles had been sold.
In the AMG engine factory in Affalterbach, highly qualified engine mechanics build the engines by hand according to the highest quality standards and the principle of “one man, one engine” – as witnessed by the AMG engine plate bearing the signature of the responsible mechanic. This exclusive craftsmanship fits exactly with the MV Agusta philosophy of raising the development and manufacturing of motorcycles to another level: “motorcycle art”.

MV Agusta Motor S.p.A., headquartered in Varese/Italy, was originally founded in 1945 by Domenico Agusta. The North Italian manufacturer attained international renown for its advanced technology and high performance, which helped to make it one of the most successful brands in the world of motorcycle racing. MV Agusta motorcycles represent dedication to the perfect balance of high performance and breathtaking Italian design. The company currently employs a workforce of approximately 260 employees at its headquarters located on the shore of Lago di Varese in Northern Italy, of whom 90 work in the area of research and development. MV Agusta’s product portfolio is based on two main platforms, comprising three- and four-cylinder models ranging from 675 to 1100 cubic centimeters engine displacement and occupying the supersport, superbike, sports-naked and crossover segments. MV Agusta Motor S.p.A. is also the owner of Cagiva, a further renowned Italian historical motorcycle brand.

Through the sales-and-marketing partnership with Mercedes-AMG, the producer of high-performance motorcycles should further accelerate its growth, which has been at a double-digit rate for the past five years. The continuing extension of its motorcycle range will be announced at the forthcoming EICMA international motorcycle fair in Milan. MV Agusta will present new models in the sports-naked segment embodying the maximum expression of design and power – the Brutale 800 RR and the Dragster 800 RR. With the all new Stradale 800 and the all new Turismo Veloce 800 models, MV Agusta will continue its expansion by entering the touring market segment for the first time.
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: Noticias Mercedes Benz

Notapor Palmero » 11 Nov 2014, 13:42

Nueva nomenclatura para los modelos de Mercedes-Benz:

Imagen
Imagen

Mercedes-Benz Passion
Avatar de Usuario
Palmero
 
Mensajes: 3767
Registrado: 11 Ago 2010, 20:04
Arriba

Re: Noticias Mercedes Benz

Notapor A.P.M. » 11 Nov 2014, 14:05

Bueno, habrá que acostumbrarse.
Lo de los diesel solo poner d, ya no se cuantos lo llevan asi :D
Y lo de la H de los hibridos suena a Toyota :qmparto:
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: Noticias Mercedes Benz

Notapor A.P.M. » 11 Nov 2014, 14:08

Por cierto, la nota de prensa
Mercedes-Benz expands brand world and introduces new nomenclature: Mercedes-Maybach for the ultimate in exclusivity and individuality

Stuttgart/Sindelfingen. The Mercedes-Benz brand continues its dynamic progress. Two new arrivals in the Mercedes-Benz brand world were introduced today in Sindelfingen by Ola Källenius, member of the Divisional Board of Management of Mercedes-Benz Cars responsible for Marketing & Sales, and Dr Jens Thiemer, Head of Marketing Communications for Mercedes-Benz passenger cars. With the name Mercedes-Maybach, the brand represented by the three-pointed star is now broadening its offering in the exclusive top segment of the market with a new sub-brand, whose individual and prestigious exclusivity will appeal to status-conscious customers. Before the end of this November, the new Mercedes-Maybach S 600 will be celebrating its world premiere in Guangzhou and Los Angeles. The Mercedes-Maybach S-Class melds the perfection of the best automobile in the world, the S-Class, with the exclusivity of Maybach. In a further move, the Stuttgart-based manufacturer of premium automobiles will start 2015 by launching a new nomenclature, the system used for the designation of its various model series and engine types, so providing its customers with a simple and transparent way to find their bearings around its ever-growing portfolio of models.

"The Mercedes-Benz brand stands for the aspiration to deliver 'The best' in terms of products, technology and services. For us, this means that we offer our customers vehicles that, by virtue of their different characteristics and specific flair, are able to fit in with all sorts of individual lifestyles. In the S-Class segment in particular, customers have very high expectations with regard to exclusivity and individuality. Mercedes-Maybach enables us to fulfil these desires in the exclusive top segment of the market".

Mercedes-Maybach embodies "the best" in its most exclusive form
In 2013 Mercedes-Benz launched its new S-Class, the best car in the world. No other vehicle embodies the values of Mercedes-Benz in quite the same way as the S-Class. The scope offered by the S-Class model range is already considerable, even though its expansion from three to six model variants is not yet complete. The spectrum ranges from the sportiest S-Class of all time, the Mercedes-AMG S 63, the most efficient, the S 500 PLUG-IN HYBRID (in future S 500 e) and the most intelligent, the S 500 Intelligent Drive, through to the most beautiful S-Class of all time, the S-Class Coupé. When it comes to safety, assistance systems and partially autonomous driving, the S-Class is way ahead of the competition.

The S-Class is not only the best vehicle, but also the most successful car in its class. With more than 100,000 units sold in its first full year of availability, it is even the best-selling S-Class ever. This success has been accompanied by a desire expressed by many customers for yet more individuality and exclusivity. They would like to drive the Mercedes-Benz S-Class in a highly exclusive and individual version that will allow them to stand out even further in this top segment. In the same way as it did with the sporty positioning of Mercedes-AMG, Mercedes-Benz has now therefore established a new offering in the exclusive top segment by introducing a sub-brand with the name Mercedes-Maybach.

The Mercedes-Maybach S-Class, which will celebrate its world premiere before the end of November, marks the opening of a new chapter in the history of the brand known by its three-pointed star. The Mercedes-Maybach S-Class expands the current range of S-Class Saloons with the addition of a vehicle that sets a new benchmark for exclusivity and meets even the most discerning of requirements in terms of its appointments. Some of the features that distinguish it from the standard-production models include extra spaciousness, special seats and lavishly designed, prestigious interiors offering extensive scope for individualisation. As a result, Mercedes-Maybach vehicles meet the requirements of even the most discerning customers worldwide. Mercedes‑Maybach is not an equipment line – it is a sub-brand that in future will deliver Mercedes-Benz vehicles in an even more exclusive form.

Simple and transparent nomenclature to provide customers with better orientation
The Mercedes-Benz model portfolio has expanded rapidly in recent years and continues to grow. The comprehensive model initiative that is currently successfully under way means that, by 2020, the Stuttgart-based premium brand will have brought more than 30 models on to the market worldwide, among them at least eleven that have no precursor in the current product portfolio. On top of this come the different body variants and drive systems. This results in an increasingly complex situation when it comes to naming the various models. "After more than 20 years of continuity involving some of the most recognised and successful product names in the world, we are now making our system of vehicle nomenclature even more understandable. Bearing in mind the international appeal of our brand, our plan has been to devise an even simpler, more transparent and more logical system for the designations of our model series, with the aim of providing clear orientation for our customers", said Dr Jens Thiemer during the launch of the new nomenclature. "Now is the ideal time to do this, for in 2015 we will be updating virtually our whole SUV model range, providing us with the perfect starting point for renaming the whole family of vehicles."

The system behind the new nomenclature is simple, clear and transparent. The model designation is always an acronym made up of between one and three upper-case letters. The different types of engine are indicated by a lower-case letter. The system centres around the five core model series, A, B, C, E and S, which will continue to be used to provide orientation for our customers. In the case of the model designations for the SUVs, in a tribute to the legendary G‑Class, all SUV models will in the future have the first two letters "GL" in their name. The "G" here denotes the car's lineage. The "L" is a letter that appears time and time again over the history of Mercedes-Benz. It is a linking letter that makes the model designations easier to remember and easier to pronounce; one that is familiar from the legendary SL, for example, or from the more recent CLS and CLA. It is followed by the third letter, which indicates the relationship to the relevant core model series. In specific terms:

GLA = GL A-Class
GLC = GL C-Class; previously GLK
GLE = GL E-Class; previously M-Class or ML
GLE Coupé = GL E-Class Coupé
GLS = GL S-Class; previously GL
G unchanged

The system for the 4-door Coupés is constructed along similar lines. The first two letters, "CL", denote the origin, the third letter the link to one of the core model series: in other words CLA and CLA Shooting Brake, or CLS and CLS Shooting Brake.

From 2016 on the Roadsters will all include "SL" in their names to denote their origin, with the third letter again the link to one of the core model series. The SLK therefore becomes the new SLC. As in the case of the G, the SL retains its designation as hitherto, in recognition of its iconic status.

In a development paralleling that of the model series designations, the different types of engines will also be given new designations. These provide clear orientation and are also shorter than the designations used until now. The boot lids will in future feature lower-case letters, whose meaning is as follows:

c for "compressed natural gas" (Natural Gas Drive until now)
d for "diesel" (BlueTEC and CDI until now)
e for "electric" (PLUG-IN HYBRID, BlueTEC PLUG-IN HYBRID and Electric Drive until now)
f for "fuel cell" (F-CELL until now)
h for "hybrid" (HYBRID and BlueTEC HYBRID until now)

As has been the case until now, there will be no suffix for the petrol models. The defining and established designation 4MATIC for our all-wheel-drive vehicles will remain unchanged and, indeed, will be celebrating its thirtieth anniversary next year. Given the way that Mercedes-Benz has evolved into the leading brand for all-wheel drive, 4MATIC will in future play an even more important role in our model portfolio. As a result of a steadily growing demand, we will in future be adding further models to the all-wheel drive segment.

"More clarity, more transparency, more consistency for Mercedes-Benz customers – we are convinced that our new nomenclature will support us in achieving this objective. The logic built up on the basis of the core model series will enable our customers to find their way round our growing product portfolio far better", was the way Dr Jens Thiemer summarised the new nomenclature.

Expanded brand world of Mercedes-Benz offers more
The expanded brand world of Mercedes-Benz now comprises two sub-brands alongside Mercedes-Benz as the core brand, whereby Mercedes-Benz stands for "The best", in a unique combination of emotional fascination and intelligent persuasiveness. Mercedes-AMG and Mercedes-Maybach interpret "The best" from the perspective of performance and exclusivity-seeking customers respectively. In addition, since the spring of 2014 "Mercedes me" has been opening up a simplified and individualised way in to the overall world of Mercedes-Benz for all customers and prospects, under the central concept of "The best for me".

"By expanding our brand world we are able to offer our customers some new ideas about Mercedes-Benz", according to Ola Källenius. "Even more choice and individuality in terms of our products, and a transparent and logical structure around them in the form of our new nomenclature."
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: Noticias Mercedes Benz

Notapor pol_maikol » 11 Nov 2014, 20:00

Me parece acertado el cambio de nomenclatura. Yo de momento estoy deseando de ver el próximo SLC.
Avatar de Usuario
pol_maikol
 
Mensajes: 1122
Registrado: 10 Feb 2012, 14:22
Ubicación: Córdoba
Arriba

Re: Noticias Mercedes Benz

Notapor xavimk3 » 11 Nov 2014, 20:10

sigue siendo un poco caótico pero al menos hay cierto orden.

y me parece que era necesario, la ensalada de nombres y letras era ya insostenible. lo de la "d" me parece lógico, diferenciar un motor diésel por llevar turbo y common-rail me parece ridículo a estas alturas.
Avatar de Usuario
xavimk3
Moderador
 
Mensajes: 7620
Registrado: 19 Sep 2004, 20:41
Arriba

Re: Noticias Mercedes Benz

Notapor Fuego » 11 Nov 2014, 20:25

Si bien la nomenclatura de la gama queda mucho más ordenada y fácil de comprender. Pienso que pierden bastante con los cambios tanto ML como el SLK.
A saber...
Avatar de Usuario
Fuego
 
Mensajes: 3359
Registrado: 01 Sep 2005, 16:37
Ubicación: Santiago
Arriba

Re: Noticias Mercedes Benz

Notapor A.P.M. » 14 Nov 2014, 10:47

Presenta una nueva generación de faros LED

Mientras que en la generación presentada en el CLS facelift es de 24 LEDs, la proxima generación pasará a tener 84 leds para mejorar la visibilidad y seguridad

Imagen
Imagen
Imagen
Imagen
Imagen
Imagen
Imagen
Imagen
Imagen
Imagen
Imagen
Imagen
Imagen
Imagen


Nota de prensa, en inglés
More light in every situation: Turning night into day

Stuttgart. Light pioneer Mercedes-Benz offers a preview of what the future holds: instead of the 24 LEDs of the gridded high beam module in the CLS headlamp, 84 LEDs per headlamp will soon be providing for even better light quality and even greater safety at night. In the medium term, as many as 1024 pixels per LED will enable optimum illumination of the road at every speed and in all traffic conditions – and without dazzling other road users.

These advances in light technology form part of a continuing tradition: around 500 LEDs attended to all the lighting functions on a car for the first time on the S-Class in 2013. In 2014 the MULTIBEAM LED headlamps on the new CLS-Class raised the benchmark once again with their precision LED light grid modules. The statistics show just how important such precision lights are: at night-time, the risk of accidents increases drastically. Five times as many pedestrians are killed on country roads as during the daytime. Although night-time driving on country roads accounts for only 20 percent of total mileage, 40 percent of all fatal accidents occur here during the night (source: BASt, German Federal Office for Roads and Traffic). Over 120 years of headlamp technology at Mercedes-Benz stand for ongoing progress in the interests of enhanced road safety and the introduction of innovations to benefit the company's customers and other road users.

"Enabling ideal visibility in all driving situations without dazzling other road users has always been our credo in developing new light systems," observes Uwe Kostanzer, head of light systems development at Mercedes-Benz. "We are pursuing the further development of LED technology to this end."

The added safety provided by the MULTIBEAM LED technology becomes apparent above all in real traffic situations: in contrast to static high beam systems, some of which have long ranges, MULTIBEAM LED also supports the driver when there are other vehicles in the field illuminated by the headlamps. By means of totally independent control of the individual LEDs of the gridded light source, the MULTIBEAM LED headlamp is able to mask other road users out of its light distribution in a fraction of a second, thereby enabling high beam to remain on. This assures the driver of the best possible light performance at all times, without dazzling other road users.
In the near future, Mercedes-Benz will be incorporating an additional HIGH RANGE LED high beam into its LED headlamps. This additional high beam employs state-of-the-art high-performance LEDs to provide high beam ranges of over 600 m in driving situations without any oncoming traffic or vehicles ahead. In contrast to the current "laser headlamps", LED technology achieves this performance at markedly lower costs and with a manageable degree of complexity. At the same time, it also enables Mercedes-Benz to exploit the legally permissible level of illumination in Europe virtually to the full. This applies irrespective of the light source employed in the headlamp for all manufacturers.

LED technology today, tomorrow and in the more distant future

When it comes to the number of pixels, the same is true of LED headlamps as of a digital camera: the more the better. The higher the number of individually controllable pixels, the more finely the light can be controlled and adapted to different conditions. A high resolution enables an increase in both precision and brilliance. Here is an overview of LED technology today, tomorrow and in the more distance future:

In 2014 Mercedes-Benz introduced the innovative MULTIBEAM LED headlamps in the CLS-Class . These are fitted with 24 individual high-performance LEDs. Each one of these LEDs can be individually electronically controlled. "Gridding" the light in this way allows the light distribution from the right and left headlamps to be controlled entirely separately and adapted to the traffic conditions with a high level of dynamism. This enables the individual areas of the road surface to be illuminated in a very specific manner. The headlamp control technology combines the gridded light source with the proven mechanical technology of the LED Intelligent Light System, and the high-performance LEDs provide for a range of 485 m.
Mercedes-Benz will soon be presenting MULTIBEAM LED headlamps with a gridded light source containing 84 LEDs, enabling even higher resolution of the light output. This will afford other road users even better protection from dazzling, while improving illumination of the road ahead for the driver. As a result of the absolutely freely configurable light distribution, it is possible for the first time to implement all high- and low-beam functions of the Intelligent Light System in entirely digital mode and without any mechanical actuators. This will make a wealth of new, adaptive light functions possible which will render night-time driving yet safer for both the driver and other road users.

This technology is set to advance at a rapid pace: In the medium term 1024 individually controllable pixels per LED chip will enable a further improvement in night-time visibility, resulting in further enhanced safety.

The partners Infineon, Osram, Fraunhofer Gesellschaft IZM, Hella and Daimler have just achieved a breakthrough in the "µAFS" research project in the form of a new type of LED chip with an extremely fine structure. Monolithically structured pixel LED semiconductor layers are built up on a silicon substrate which, via the integration of circuit parts, allows the selective control of more than 1024 individually addressable pixels per LED chip. This LED technology developed in the project sponsored by the Federal Ministry for Education and Research (BMBF) is to be installed and tested in a Mercedes-Benz experimental vehicle in 2015.

LED and partial high beam: scientific inventions of historical proportions

A Nobel Prize-winning innovation features on board every Mercedes-Benz with LED headlamps: Next month, the physicists Shuji Nakamura (*1954), Isamu Akasaki (*1929) and Hiroshi Amano (*1960) will receive what surely is the world's most highly reputed science award for the development of blue LEDs. This invention enables light sources to be scaled down, subsequently making it possible to use them in LED car headlamps. At present, it is thus possible to fit up to 100 LEDs with luminous surfaces in the millimetre range behind a lens.

The idea of partial high beam goes back still further: in the face of ever denser traffic in the 1950s, computer pioneer Konrad Zuse (1910-1995) came up with a proposal for combining maximum illumination of the road with minimal irritation of oncoming traffic. Zuse employed several headlamps, each of which illuminated part of the road and could be switched off by means of photocells when the latter detected other cars within their range. In 1958 he had this "Lighting system, photoelectrically controllable by counter light" registered by the German patent office under the number 1190413. This partial high beam did not go into series production until this year, however, with the world premiere of the MULTIBEAM LED headlamp in the Mercedes-Benz CLS.

Milestones in Mercedes-Benz lighting technology

Mercedes-Benz has always stood for innovations aimed at improving customer benefits. Many innovations make their way into large-volume model series after starting life in research vehicles or on board technology flagships such as the E-, CLS- and S-Class. Here is a brief chronology of the most important milestones in Mercedes-Benz lighting technology over the past 20 years:

1991: Premiere of xenon headlamps with gas discharge lamps in the Mercedes F 100 research vehicle
1995: Xenon headlamps with dynamic headlamp range control in the E-Class
1999: Premiere of bi-xenon technology in the CL-Class
2003: World premiere of the active light function in the E-Class
2004: World premiere of bi-xenon headlamps with active light function and cornering light function in the CLS-Class
2005: Premiere of Active Night View Assist in the S-Class
2006: World premiere of the Intelligent Light System in the E-Class
2009: World premiere of the Intelligent Light System with Adaptive Highbeam Assist in the E-Class
2009: Premiere of Active Night View Assist Plus in the S- and E-Class
2010: World premiere of LED High Performance headlamps incorporating all the light functions of the Intelligent Light System in the CLS-Class
2010: New xenon burner with 20 percent higher colour temperature, and thus even closer to daylight, in the S- and E-Class
2011: Start of series production of the spotlight function (world premiere)
2013: New E-Class fitted as standard with energy-efficient LED low-beam headlamps (34 watts/vehicle)
2013: New S-Class becomes first car to be fitted exclusively with LED headlamps as standard
2014: World premiere of MULTIBEAM LED headlamps in the new CLS-Class
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: Noticias Mercedes Benz

Notapor Ruben4you » 14 Nov 2014, 12:58

Me parece una gran idea, siempre que sea por seguridad y evitar deslumbramientos...
Avatar de Usuario
Ruben4you
 
Mensajes: 1201
Registrado: 04 Jun 2005, 22:53
Ubicación: madrid
Arriba

Re: Noticias Mercedes Benz

Notapor A.P.M. » 27 Nov 2014, 17:38

Nueva familia AMG Sport

Estará justo entre la gama normal y los deportivos AMG. Alguno ya se ha visto, como el clase C, otro va oculto, como en el GLE coupe, y ambos aparecen en la primera imagen que presenta esta nueva gama:
Imagen

Su misión será duplicar las ventas de la familia AMG en 2017 y los primeros modelos que veremos será en el salón de Detroit. No parece dificil ver que serán los GLE coupe y C AMG Sport

Nota de prensa, en inglés
MERCEDES-AMG UPS THE ANTE

- Growth strategy aimed at new market segments
- Doubling of global sales targeted by 2017
- Premiere of the new AMG Sport models at the North American International Motor Show in Detroit


Affalterbach - The sports car and high-performance brand Mercedes-AMG will achieve a new sales record of well over 40,000 units globally this year. Its entry into the compact segment and the broadening of its product range have provided the Affalterbach-based company with access to new customer groups and secured success in established and new markets. New models developed entirely in-house, such as the SLS AMG and, more recently, the Mercedes-AMG GT, consolidate the brand's success story and place it firmly on course for sustained growth.

"We are proud of these successes, as they provide the basis for the next stage of our growth strategy, which we are now launching," explains Tobias Moers, Chairman of the Board of Management of Mercedes-AMG GmbH. "In the next three years we aim to more than double our total sales for 2013."

To render the AMG brand and its technology more accessible, Mercedes-AMG is establishing a new product line by the name of "AMG Sport", offering enhanced performance and technical refinements. The AMG Sport models will fill the gap between the AMG Sports package for Mercedes-Benz vehicles and the classic AMG models, thereby underpinning the brand's growth strategy on a sustained basis.

Opening up new customer groups and segments will raise the company's profile and boost AMG's sales potential worldwide. "The new Sport models represent a convincing proposition for our customers: genuine sports car technology becomes accessible, appealing to an even broader-ranging clientele worldwide," observes Tobias Moers. "For all our dynamic growth, we remain true to our brand claim of "Driving Performance"."

The AMG Sport models bear out the high-performance brand's claim with uprated engine output, all-wheel drive as standard in selected markets and special chassis components and brake systems from the classic AMG models. Signature AMG driving dynamics and a highly emotional driving experience are the tangible outcome for the customer. The first two AMG Sport models are set to be unveiled at the International Auto Show in Detroit in January 2015. It is planned to add further models to this new product line in due course.

The Affalterbach-based sports car brand has set itself high aims not only with regard to customer enthusiasm and growth: the fleet consumption has been reduced by 35 per cent by means of a comprehensive range of technical measures carried out in the past five years as part of the "AMG Green Performance Strategy". The AMG models are already among the most fuel-efficient and low-emission vehicles in their respective segments, with the new engine technologies and all-embracing lightweight design set to render them yet more efficient. The introduction of the Sport models in 2015 will make an additional significant contribution towards lowering the fuel consumption of the AMG fleet. The company headquarters in Affalterbach and the logistics organisation are also all set for sustained growth and represent the benchmark in efficiency, flexibility and environment-friendliness. The company has received recognition from the "German Sustainable Building Council", for example, and is the winner of the "Deutscher Logistik-Preis 2014" from the BVL Global Supply Chain Network for both its environment-friendliness and its supply chain strategy.
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: Noticias Mercedes Benz

Notapor A.P.M. » 02 Dic 2014, 12:22

Mercedes aumenta la producción de baterias de Litio-Ion

Nota de prensa, en inglés
Daimler Expands Manufacturing Capacities for Lithium-Ion Batteries

- Investments of around €100 million in Deutsche ACCUmotive
- Frank Blome, Managing Director Deutsche ACCUmotive: “We are looking forward to continuous growth in the demand for Deutsche ACCUmotive batteries in coming years.”
- Entry in new field of stationary energy storage


Kamenz, Germany – Daimler AG is expanding the production capacities for lithium-ion batteries with investments of around €100 million in the Deutsche ACCUmotive subsidiary in coming years. Currently, a new building to be completed by mid-2015 is under construction in the Saxon city of Kamenz. “We are looking forward to continuous growth in the demand for Deutsche ACCUmotive batteries”, said Frank Blome, Managing Director of Deutsche ACCUmotive, during the topping out ceremony for the new production hall on Monday, which was attended by Saxony's Prime Minister Stanislaw Tillich and further guests from politics and the economy. With the completion of the third construction phase Deutsche ACCUmotive will have nearly 20,000 m² of production and logistics space at its disposal - or four times the area since the start of production in the year 2011.

“The production of battery systems by Deutsche ACCUmotive GmbH in Kamenz will contribute significantly to the growing expertise of the auto state Saxony in the area of electro mobility and battery technology. That is why I am pleased about the three-digit million investments in a company like Deutsche ACCUmotive GmbH here in Kamenz”, said Tillich. “The expansion of the company again shows that Saxony has much to offer as an innovation location. With excellent research close to industry at the technical universities, colleges and research facilities as well as with very well educated specialist manpower. These are the best prerequisites for investments here in Kamenz and in the entire free state of Saxony”, said the Prime Minister.

Deutsche ACCUmotive was founded in 2009 for the development and production of lithium-Ion battery systems for vehicles. The company is a wholly-owned subsidiary of Daimler AG. The research and development activities of Deutsche ACCUmotive are located in Nabern in the Stuttgart area and the production takes place in the Saxon city of Kamenz. Series production started in the year 2011. The Daimler subsidiary supplies lithium-ion batteries for the current smart fortwo electric drive and the hybrid variants of the S-, E- and C-Class of Mercedes-Benz, and has delivered more than 50,000 lithium-ion batteries to date.

“Deutsche ACCUmotive will be producing the lithium-ion batteries for the upcoming electric versions of the smart fortwo and forfour from 2016 as well as for future hybrid models of Mercedes-Benz”, announced Blome. “The development and production of our lithium-ion batteries is competitive in every respect. We are in the black at Deutsche ACCUmotive.” Thus, Kamenz and the Nabern development location will continue to play a key role in high-performance batteries for alternative drives - from hybrid models to the pure electric vehicle - as a high-tech location in the Daimler Group.

Additional growth opportunities outside the automotive industry also arise for Deutsche ACCUmotive through the entry into the business with stationary applications, where the vehicle batteries serve as the technological foundation for the development of stationary energy storage units. The scalability of the systems enables the use of the lithium-ion batteries in big industry for network stabilization and smoothing of peak loads (peak shaving) for energy producers as well as private households, for example, in conjunction with photo-voltaic installations. Deutsche ACCUmotive can already profit from economies of scales through series production of vehicle batteries and score with the high safety standards from the automotive industry. The company is certified according to ISO TS 16949. “We have already concluded the first customer contracts. With our systems we can make an important contribution to the energy turnaround”, said Blome.

About Deutsche ACCUmotive

Deutsche ACCUmotive GmbH und Co. KG, founded in 2009, is a wholly-owned subsidiary of Daimler AG. The company develops and sells highly complex drive batteries for hybrid and electric vehicles based on lithium-ion technology. The company headquarters of Deutsche ACCUmotive, located in Nabern in the Stuttgart area, also houses the research and development function. The production takes place in the Saxon city of Kamenz. The Daimler subsidiary employs more than 250 employees – about 180 in Kamenz and approximately 80 in Nabern. Deutsche ACCUmotive has delivered more than 50,000 lithium-Ion batteries to date.

At this time the product range of Deutsche ACCUmotive includes three lithium-ion battery systems for different models. This includes the current smart fortwo electric drive and the Mercedes-Benz Models S 300 BlueTEC HYBRID, S 400 HYBRID, E 300 BlueTEC HYBRID, E 400 HYBRID and C 300 BlueTEC HYBRID. Systematic hybridization is a fixed element of the Daimler powertrain strategy. In the current year, Mercedes-Benz has sold more hybrid-driven vehicles than all other German manufacturers combined.
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: Noticias Mercedes Benz

Notapor Palmero » 05 Dic 2014, 14:33

En un evento organizado ayer por Mercedes-Benz España se pudo ver este calendario de las novedades para 2015:

Imagen

Coches.net
Avatar de Usuario
Palmero
 
Mensajes: 3767
Registrado: 11 Ago 2010, 20:04
Arriba

AnteriorSiguiente

Volver a Noticias

¿Quién está conectado?

Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 4 invitados