¡Hola invitado! Accede o regístrate

JE Design: SEAT León SC

JE Design: SEAT León SC

Notapor CABO » 18 Sep 2013, 13:42

Esta gente ha ido aprendiendo, no lo veo nada mal, le da carácter al coche.
Seat Leon SC
Imagen
Imagen

http://www.motorpasion.com/tuning-prepa ... at-leon-sc

http://www.inautonews.com/seat-leon-sc- ... n-tuning-3
Avatar de Usuario
CABO
 
Mensajes: 9514
Registrado: 27 Jun 2004, 16:37
Ubicación: TENERIFE
Arriba

Re: JE Design SEAT León SC

Notapor Fuego » 18 Sep 2013, 16:18

Simple pero efectivo, lo único es que me parece algo exagerado las cuatro salidas de escape.
Avatar de Usuario
Fuego
 
Mensajes: 3359
Registrado: 01 Sep 2005, 16:37
Ubicación: Santiago
Arriba

Re: JE Design SEAT León SC

Notapor A.P.M. » 18 Sep 2013, 16:23

El faldón delantero es un pegote, creo que demasiado grande. Lo de los 4 escapes, en fin, la moda de cuanto mas mejor...
Aun asi, es mucho mas discreto que preparaciones que ha hecho sobre el Leon II que son para quemarlos en la hoguera
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

JE Design: SEAT León SC

Notapor A.P.M. » 16 Oct 2013, 18:42

Ahora otro Leon, esta vez 5 puertas
- mismo faldón delantero, taloneras y faldon trasero con una salida, todo con look carbono (1,369€)
- 2 tipos de llantas, de 18 (839€) y 19 pulgadas (999)
- escape doble simple a un lado, aunque está disponible el doble a cada lado (899€)
- aleron (357€)



A nivel mecanico:
- El 1.8 TSi de 180cv, con una reprogramación se va hasta los 215cv. Mejora el 0-100 (ahora 6.9 seg) y la vel. max (ahora 235 km/h). 1990€ con un año de garantia
- Suspensiones 3cm mas baja (237€). Si se quiere mas, suspensiones roscadas KW bajando hasta 6.5cm (1,049€). Si los quieres regulables, KW variante 3 (1,749€)

Imagen
Imagen
Imagen
Imagen
Imagen
Imagen

http://www.worldcarfans.com/11310166454 ... -je-design

nota de prensa, en inglés
JE DESIGN increases the performance to 215 hp

- Entire aerodynamics kit in carbon look
- 18 and 19-inch wheelset and lowered suspensions
- All components available with TÜV certificate

Auto Emoción reinterpreted: JE DESIGN gives the most powerful Seat Leon with a gasoline engine, the FR 1.8 TSI, even more power. With increased performance, a sporty aerodynamic kit and sporting accents, the refined Spaniard breaks away from the rest of the series. An improved suspension and light alloy wheels demonstrate the sharper approach by JE DESIGN.

After the engineers from Leingarten in Baden-Wuerttemberg have finished their work, the 1.8 TSI engine produces more power. Instead of 180 hp (132 kW), the engine puts out 215 hp (158 kW). In addition, the refiner has boosted the maximum torque from 250 to 300 Newton meters. Thus, the Seat reaches a speed of 100 after just 6.9 seconds (series: 7.5 seconds). The acceleration tops out at 235 km/h. The production model has a maximum speed of 226 km/h.

The 1.8 TSI in the FR owes its newly-won power to an optimized control unit. JE DESIGN offers the entire performance boost for 1,990 Euro including VAT and twelve month warranty.

The mighty Leon shows the enormous increase in performance with a new aerodynamic package in carbon look (complete for 1,369 Euro). The front spoiler (417 Euro) hugs the street. Side skirts (357 Euro) calm down the air flow and pass it on to the rear skirt insert (298 Euro). In the five-door hatchback, a roof spoiler (357 Euro) also ensures the necessary downforce on the rear axle.

Optional (not shown), there are also two stainless steel tailpipes on both sides, each with a diameter of 80 millimeters. The complete stainless steel muffler (899 Euro) has an EC approval. JE DESIGN offers all aerodynamics components (except the roof spoiler) exclusively in carbon look. This eliminates time-consuming painting, and the parts can be assembled on the vehicle immediately. Of course, these have a TÜV certificate.

Lowering springs (237 Euro) improve the road adhesion of the FR and bring the car 30 millimeters closer to the tarmac. Whoever would like to reduce the distance to the road individually can pick up the KW coilover suspension made of stainless steel (1,049 Euro). With it, 35 to 65 mm are possible.

For the highest standards, JE DESIGN also offers the adjustable rebound and compression-damping KW coilover suspension Variant 3 (1,749 Euro).

"Scorpio" type light alloy wheels, specially developed for the fiery Spaniard, now fill the wheel arches. They are available in the dimension 7.5x18 inches and matt black finish with matt silver front. Especially for the top model of the current FR-series, JE DESIGN has wrapped the wheels with high-performance tires in size 225/40. The complete wheel set is available at a price starting from 839 Euro.

Alternatively, the proven MULTISPOKE rims can be mounted in shadow silver in 7.5x18 (complete wheel set from 839 Euro), or if desired in 8x19 with 225/35 R 19 tires (complete wheel set from 999 Euro).

Sporty and elegant: JE DESIGN presents the most agile Seat Leon FR with a TSI engine. All parts (except for the roof spoiler) are, of course, also available for the Leon FR in the three-door version.
Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: JE Design: SEAT León SC

Notapor A.P.M. » 27 May 2014, 12:02

Avatar de Usuario
A.P.M.
Moderador
 
Mensajes: 19080
Registrado: 28 Sep 2007, 12:15
Arriba

Re: JE Design: SEAT León SC

Notapor CABO » 11 Jul 2014, 17:33

Atentos a éste, que dejan el coche con un aspecto brutal no exento de atractivo.

Imagen
Imagen
Imagen
Imagen

http://www.leblogauto.com/2014/07/je-de ... cupra.html
Avatar de Usuario
CABO
 
Mensajes: 9514
Registrado: 27 Jun 2004, 16:37
Ubicación: TENERIFE
Arriba


Volver a Firmas y preparaciones

¿Quién está conectado?

Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 1 invitado

cron